| Temperature range |
+ 20 ºC - 300 ºC |
| Temperature rise speed |
Rise from room temperature to 300 ºC for about 35 minutes |
| Insulation performance |
The outer wall temperature shall not exceed 45 ºC (when the furnace temperature reaches 200 ºC) |
| Temperature control accuracy |
± 1 ºC |
| Temperature uniformity |
± 3 ºC |
| Power supply |
380V / 50Hz |
| Equipment construction: |
| Color |
Overall spraying of Matt amino paint, silver grey |
| Equipment positioning |
Iron foot support at the bottom, and the height from the lower plane of the liner to the ground is 380mm |
| Inner chamber size |
1300mm * 1520mm * 710mm |
| Material placement |
Equipped with two movable drying racks, each with 8 trays |
| Heat source configuration |
3 W-type heat pipes with metal sheath, in the top air duct |
| Circulation mode |
Horizontal air supply, 1 set of 370W motor |
| Air intake and exhaust |
Air intake from fan shaft hole. Top vent, manual vent |
| Sheet metal structure |
1mm stainless steel plate for inner tank, 1mm cold-rolled plate for outer shell, bending, splicing and welding |
| Framework structure |
The whole 4-angle steel frame, the bottom 5-angle steel frame, the door frame 5mm thick sheet metal reinforcement |
| Insulation layer |
90mm aluminum silicate fiber |
| Structure |
single door, silicone strip seal, alloy hinge, rocker lock |
| Electrical control: |
| Dual digital PID intelligent temperature controller main control |
| Independent temperature measurement by the monitor, over temperature protection circuit to monitor the overall operation of the equipment to ensure the safety of the equipment and drying materials |
| Adopt SSR solid-state relay to turn on and off to control the temperature rise of electric heater |
| Equipped with 0-99.99 hour timer, which can be used for direct timing or temperature timing, and automatically cut off heating and alarm when the time is up |
| Air blast heating interlock protection circuit, that is, air blast before heating to prevent heater from dry burning |
| The phase sequence protector shall prevent the reverse operation of the fan caused by the reverse connection or lack of phase sequence |
| Heating circuit breaker to prevent accidents caused by overload and short circuit of heating circuit |
| Fan and control circuit breaker shall prevent overload and short circuit of fan and control circuit from causing accidents |
| The temperature recorder records the temperature curve of the working area in real time, which is used to analyze the material baking process (optional) |
Audited Supplier 
){kind=link}
){kind=link}