| Customization: | Available |
|---|---|
| Power Supply: | 110V/220V |
| Certification: | CE, ISO |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Control model:
1.CPU control, precision pulse energy Adjustable(0-99.9%), preloading time and the holding time Adjustable(0-2.55s)
2.Two different ways of welding, (1) ordinary welding; (2) continuous welding.
3.The built-in welding counter, all solder joints can be calculated
4.Data storage block using EEPROM, no battery life problem, every time you boot, go back to Last using the welding procedure.
Multiple fault protection
High power circuit and control circuit of welding machine, is equipped with two sets of different kinds of protection circuit, in order to prevent the equipment from overheating, outside pressure and power fluctuations butt welding machine interference, in order to protect the welder in harsh environment. For some common fault prompt functions, welding machine overheating and damage, will automatically alarm, and at the same time to cut off the power supply.
Precision welding head design
1.Adopt cylinder combined with spring buffer, make the two welding needle can adjust pressure when welding, because of the spring buffer action, the cylinder does not directly effect on the solder joints, to effectively protect welding plane.
2.Inside of machine head adopts photoelectric pressure switch, only if the two welding needle discharge welding pressure to achieve the set pressure, to protect the reliability of the welding, and double needle pressure can be adjusted.
Unique structure
1.The workbench stepless lift, convenient to precision adjust the position
2.Unibody design, pneumatic operation, easy operating
| Working Voltage | 110V or 240V AC, 50/60Hz |
| Output Power | 10KW |
| Input Air Pressure | 0.1 - 0.8 MPa (Air Compressor is not included. Please click here to order) |
| Welding Current | 0-99% Adjustable |
| Welding probes | · Allow independent adjustment for pressure · Ensure consistent welding pressure · Fully eliminates the phenomenon of low voltage or condensation occurred to lithium batteries after welding · Homogeneous welding spot, small spark, and no black spots |
| Welding Switch | Built in optoelectronic welding switch, which can eliminate the need of changing switches for similar welding machines |
| Controller |
· Single chip control · Digital LCD control panel for setting all parameters |
| Tab Thickness Applicable | 0.03 - 0.5mm tab (10 pcs 0.2mm Tab will be provided in the package for customer's practice) |
| Warranty | · One year limited warranty with lifetime support · Rusting and damage due to improper storage condition or maintenance is not covered by warranty |
| Product Dimensions | 750(L)*650(W)*550(H)mm |
| Application Notes | · Please click here to learn the basic knowledge of Capacitive Discharge Spot Welder · Avoid touching weld spots immediately after the weld has been performed as they will be hot · Always wear safety glasses when working with spot welders and weld heads · Be careful not to pinch fingers in moving weld head parts or between welding electrodes · Remove hand jewelries before welding |
| Net Weight | 50 kg (110 lbs) |
){kind=link}