Automatic PVC and Nickel Strip Cutting Machine for Alloy Strip/Copper/Aluminum Foil Cutting

• Power Supply: 110V/220V
• Certification: CE, ISO
• Warranty: 2 Years
• Transport Package: Wood Packing
• Trademark: TMAX
• Origin: China
• Model NO.: TMAX-CT1

Product Description

Automatic PVC And Nickel Strip Cutting Machine For Alloy Strip/Copper/Aluminum Foil Cutting

INTRODUCTION
The cutting machine is suitable for cutting tube, ribbon/webbing/belt, cable/wire, sheet, film etc.
Tube:  PVC tube, heat shrink tube, PVC heat shrinking tube, fiberglass tube, Teflon tube, corrugated tube, etc.
Cable: Flat cable, copper wire, etc
Tape: nickel strip, hook and loop, cotton tape, elastic band, plastic tape, zipper, conductive tape,foam, etc
Sheet: battory separator, Nickel sheet, diffusersheet, plastic/rubber sheet, pvc sheet,etc
Film: plastic film, reflecting film, double-sided tape, Malar film, insulation paper, PE, Copper/Aluminum foil, release paper,etc

ADVANTAGE
1.High speed: It can cut 100~120 cut per minute. (50mm long)
2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.
3.Cutting type: For cold cut and Optional hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.
4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.
5.Automatic stopper: It stops automatically if materials run out during operation
6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on
7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.
8.High speed, high accuracy, designed for cutting non-adhesive materials.

SPECIFICATION

Model	Nickel Cutting Machine  YS-100
Source voltage	AC 220V/110V, 50/60HZ, Customized
Power	200W
Warranty	One year limited warranty with lifetime support
Advantages	1 In automatic stop without materials, unattended 2 With a knife or blade adjustment conveniently 3 Automatic grouping and total cumulative count 4 Suitable for all kinds of metal and no-metal strip materials, such as  copper foil,  aluminum foil, copper foil tape, batteries nickel belt and so on
Cutting speed	0-130times/min
Cutting length	0.1mm-10m
Cutting width	0.1-100mm, can be customized according to request
Dimension(L*W*H)	360*300*350mm
Weight	About 30kg