| Customization: | Available |
|---|---|
| Species: | Round Applanation Die Cutting Machine |
| Imprinting Type: | Platen |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Automatic Pouch Cell Die Cutter for Battery Electrode Cutting
Features
1.The feeding length can be preset, the electronic ruler is displayed, and the touch screen setting is adjusted.
2.Aluminum plastic film floating roller tensioning, automatic discharge, with material detection function.
3.Configure 10T gas-liquid booster cylinder, servo stretch forming.
4.The robot servo feed, the length can be set through the screen.
5. The position of the cutter can be adjusted according to the length of the product, and the gap of the cutter can be pre-stressed and adjusted.
6. Using programmable controller PLC to achieve automatic control, touch screen to achieve man-machine dialogue, easy to operate settings.
7. The mold part is provided with light curtain safety protection, and the necessary door opening protection for the visual door.
8. With output statistics.
9. There are manual,automatic operation function, fault alarm function.
10. Combined frame: square through the lower frame, aluminum profile upper frame.
|
Voltage |
AC220V/50Hz |
|
Power |
0.5KW |
|
Compressed Air |
≥0.6MPa 100L/min |
|
Dimension |
L2350 *W740 * H1800mm |
|
Single Section Maximum Size |
L1650 × W740 × H1800mm |
|
Parallelism between the lower plane of the die shank and the bottom plate |
0.2mm |
|
Aluminum Plastic Film Tension |
Floating roller tension |
|
Punching Depth Accuracy |
±0.1mm |
|
Feeding Accuracy |
±0.2mm |
|
Electronic Ruler Accuracy |
0.01mm |
|
Cutting Knife Life |
1 million times (repair) |
|
Equipment Ccapacity |
500-700 / H (depending on product size and mold selection) |
|
Applicable Mold |
Three-piece mold and spring mold can be used (with 1 set of mold) |
|
Activity Rate |
95% |
|
Pass Rate |
99.5% |
|
Pressurized Cylinder |
10T |
|
The Diameter of the Coil |
<Φ350mm |
){kind=link}