| Customization: | Available |
|---|---|
| Production Scope: | Product Line |
| Production continuity: | Continuous |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Battery Combustion Test Equipment for Safety and Fire Hazard Evaluation
I. Product Overview:
This device is used to observe the combustion behavior of batteries when exposed to a burner. The mesh screen is fixed 38.1 mm above the burner. It features 20 holes spaced every 25.4 mm, with a wire diameter of 0.43 mm. The burner is ignited, and the combustion is monitored until the battery explodes or burns out. The equipment includes a burner with a support frame, test table, standard metal mesh cover, and standard metal mesh screen.
II. Compliance Standards:
SJ/T 11169-1998 (eqv UL 1642:1995)
SJ/T 11170-1998 (eqv UL 2054:1997)
UL 1642
GB 8897.4-2002 6.3.2.9
IEC 60086-4:2000
III. Product Parameters
|
Burner |
Bunsen burner with an inner diameter of 9.5 mm, length approximately 100 mm |
|
Flame Application Time |
0 to 9999 seconds |
|
Test Hole Surface Diameter |
102 mm |
|
Device Features |
Automatic ignition and fully automated test process |
|
Test Hood Width |
24″ (610 mm), octagonal |
|
Test Hood Height |
12″ (305 mm) |
|
Control Mode |
Button control |
|
Combustion Gas |
Liquefied petroleum gas or methane (customer-supplied) |
|
External Dimensions |
900 x 930 x 970 mm (L x W x H) |
|
Weight |
Approximately 75 kg |
|
Power Supply |
AC 220V, 50/60 Hz |
){kind=link}