| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Type: | Blade Coater |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | TMAX-ITM |
| Power | 3PH 380V,50HZ, |
| Suitable system | LiFePO, lithium cobalt oxide,Lithium manganese oxide system and coating process of battery anode and cathode |
| Operating material thickness | Al foil: 10~30um Cu foil: 7~30um |
| The design of the roll surface width | 300mm |
| Guaranteed coating width | 50~280mm |
| Mechanical running speed of equipment | 7m/min |
| Coating speed | 1-7m/min(Depending on the drying condition) |
| Suitable for slurry viscosity | 2000~16000 Cps |
| Single coating thickness range | 50-150μm |
| Minimum interval length | 5mm |
| Multi section minimum coating length | 20mm |
| Solvent properties | Oiliness solvent NMP(s.g=1.033,b.p=204ºC) |
| Water solvent H2O/NMP(s.g=1.000,b.p=100ºC) | |
| Suitable solid content | Anode S.C. 60%±20% |
| Cathode S.C. 60%±20%(PVDF system) S.C. 50%±5%(SBR system) |
|
| specific gravity | Anode 1.5-2.59/cm2 Cathode 1~1.89/cm2 |
| Coating method | Double sides 3 sections, unequal intermittent transfer coating / second sides automatic tracking / continuous transfer coating |
| Base material running direction | Forward coating ,The base material empty foil movement Positive, reverse. |
| Control pressure | 0 ~ 50N |
| Rectify deviation | EPC control,stroke 80mm |
| Oven length | 12m |
| Material quality | SUS304 stainless steel,Inner tank 1.0mm,outside tank 1.2mm |
| Warranty | One year limited warranty with lifetime support |
){kind=link}