TMAXCN Brand- FMF-300 Levitation Cold Crucible Vacuum Melting Furnace ( 300 g Max )

• Customization: Available
• Certification: CE, ISO
• Place Style: Vertical
• Model NO.: TMAX- FMF-300
• Range of Applications: Lab
• Type: Furnace
• Usage: Aluminum Die-casting
• Fuel: Electric
• MOQ: 1
• Voltage: 110V/220V
• Transportation: Sea; Express etc
• Trade Term: EXW; FOB; DDP; DAP etc
• Transport Package: Wood Packing
• Specification: Customized
• Trademark: TMAX
• Origin: China

Product Description

 

 

 

 

 

Levitation Cold Crucible Vacuum Melting Furnace ( 300 g Max ) - FMF-300

 

 

FMF-300 is an Advanced Vacuum Float-Melting System for exploring new generation magnetic alloy and metallic materials with max. loading 300 g sample. The system uses a 60KW high-frequency induction heater to cause a metallic sample to float during melting by magnetic vortex within a special designed water-cold copper crucible placed inside a vacuum-sealed quartz tube. Therefore, it can produce extra high purity Ferro or magnetic alloy without any contamination.

 

Specifications

Induction Heater	Working Voltage: AC 220V (3 phases) 50/60Hz  Working Current: 10-100 Amp Output Frequency: 50-200 kHz non-adjustable Max. Output Power: 60KW Electrically driven crucible holder for easy sample loading Cooling Water Requirement: pressure ≥ 0.3Mpa, water flow rate ≥130 L/min Max. Load: <300g according to stainless steel density as calculation
Copper Crucible	Dimensions: Φ45 mm(ID) x 52.5 mm(H) Water cooling inside Required Water Flowrate: ≥40 L/min Max. Load: < 300g according to stainless steel density as calculation Min. Load 5 g 300 g melting capability is available upon request.
The requirement for water and Gas	Total water cooling required > 135 L/min two recirculating water chiller are included water chiller KJ6300, 116L/min and KJ5300, 16L/min. High purity Argon gas ( > 5N) tank with pressure regulator is required, but not included.
Quartz Tube	80 mm OD x 72mm ID. x 300mm L
Vacuum Flange	One pair of Vacuum Flanges with double high-temperature silicon O-rings Max. Vacuum Pressure: <5pa (4x10-2 torr) by mechanical pump (included) <5x10-3pa (4x10-6 torr) by turbopump Top flange is the hinged type for easy sample loading and one vacuum-sealed flip shovel is built-in to melt the sample in multi-times The bottom flange can be controlled automatically for easy sample loading
Vacuum Pump	One heavy-duty mechanical pump with exhaust filter is included, and place inside the mobile case. KF25 adapter, bellow, and valve are included for immediate use Turbopump is available upon request at extra cost
Dimension	2210mm(L) x 1600mm(W) x 1790mm(H)
Net Weight	260 kg (575 lbs)
Compliance	NRTL Certification is available upon request at extra cost
Application Notes	Warning The flow rate of gases should be limited to < 200 SCCM (200 ml/min) The Melting System are designed for using under vacuum and low pressure < 0.02 MPa / 0.2 Bar/ 3 psi. Gas build-up with pressure levels exceeding over 3 PSI may cause irreversible damage to the furnace chamber. A pressure regulator must be installed on your input gas tank The output gas pressure must be set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition.  Never heat the furnace while the gas release valve is closed, and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating. Open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages. Attention:  Understand the standard procedure for vacuum melting and inert gas melting prior to operation. Read the manual carefully. Monitor and properly control the inside pressure of reaction vessel at all time during operation. Otherwise, failure of operation may result in irreversible damage to the equipment or personal injury

 

 

Product Image

 

Certifications