TMAXCN Brand Three-Zone CVD Furnace (1200C Max.) with Tube Extractor for Large-Area Graphene Growth

• Customization: Available
• Application: Lab
• Customized: Customized
• Model NO.: TMAX-1100X-III-D11
• Structure: Tubular
• Material: Stainless Steel
• Type: Tubular Furnace
• Transport Package: Wood Packing
• Trademark: TMAX
• Origin: China

Product Description

Three-Zone CVD Furnace (1200C Max.) with Tube Extractor for Large-Area Graphene Growth

TMAX-1100X-III-D11 is a three-zone dual tube furnace with max. working temperature of 1200°C. Dual-tube design enables large area (~7000 cm^2) CVD film growth on the metallic foil wrapped on the inner tube surface. Tube extractor allows the operator easily remove the inner tube without damaging the film products and be ready for the next step of film transfer. It is an ideal tool for producing graphene sheet or flexible electrodes of energy storage devices.

SPECIFICATIONS:

Features	Dual quartz tube design:  280mm (11") Dia. outer tube with 254mm (10") Dia. inner tube. The metallic foil can be wrapped on the surface of the inner tube for CVD film growth. Manually operated tube extractor enables easy removal of the inner tube and is ready for the later film transfer.   36'' Long constant heating zone provides over the 7000cm^2 tubular surface for large area CVD growth of graphene on metallic substrates.
Heating Zones & Temp. Control	Three heating zones: (1230mm, 48" L in total) Zone 1: 410mm  (16") Zone 2: 410mm  (16") Zone 3: 410 mm (16") Constant Heating Zone: Max. 36" long with +/- 5°C accuracy if set three zones at the same temperature. PID temperature controller with 30 segments programmable and +/- 1° C accuracy. Build-in Overtemp. and TC failure protections. High-quality K type thermocouples from Omega.
Working Temperature	Max. Working Temperature:  1200°C  < 1 hour Continuous Working Temperature:  1100°C
Heating Rates	Max. 10°C /min  (RT~800°C) Max. 5°C /min (800~1100°C)
Power	AC 220VAC Three Phase, 50/60 Hz  24 KW  Max. Powder cord is included without a plug
Processing Tubes	Two High purity Fused Quartz Tubes are included: Outside tube: 280mm O.D. x 270 mm I.D. x 2070 mm L Inside tube: 254mm O.D. x  244 mm I.D. x 2310 mm L
Vacuum sealed flanges	A pair of SS304 flange seals dual tubes in the enclosure tightly via a set of high-temp. silicon o-ring gaskets (please click the picture on the left for details.) KF25 port with needle valve is mounted on the right flange for vacuum pump connection and manual pressure relief Right flange can be attached to the tube extractor 1/4'' tube compression fitting on the left flange for gas feeding Mechanical pressure gauge on the left flange for tube pressure monitoring Thermoblocks attached to the flanges established a thermal barrier for the constant heating zone  Vacuum Compatibility: 10^-2 torr by the mechanical pump; 10^-4 torr by the molecular turbo pump.
Tube Extractor	Manual operating tube extractor can be attached to the right flange to retrieve the 10'' Dia. inner tube with film products upon the completion of the process. The picture on the left illustrates the operating procedure.
Furnace Dimension	5400L x 770W x 1500H mm  ( Include the tube extractor )
Net Weight	~600 kg
Shipping Weight & Dimensions	1) 1500 lbs, 97"x39"x74" 2) 1800 lbs, 123"x39"x80"
Warranty	Two years limited warranty for electrical parts. (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty)
Compliance	CE Certified All electric components ( >24V) are UL / MET / CSA certified The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
Warnings	All quartz tube furnaces  are designed for using under vacuum and low pressure < 0.2 bars / 3 psi / 0.02 Mpa Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.  Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C For the use of flammable gasses such as H2 and CH4, please consult with MTI technical team for safety measures. We Strongly suggest that the furnace needs to be operated inside a fume hood with H2/CH4 leaking detector installed.

 

---