TMAXCN Brand Lab 1700c Max Controlled Atmosphere Muffle Furnace W/ PC Interface

• Customization: Available
• Application: Industry, School, Hospital, Lab
• Customized: Customized
• Model NO.: TMAX-1700CAtmosphere
• Certification: CE, ISO
• Structure: Box-Type
• Material: Stainless Steel
• Type: Muffle Furnace
• Transport Package: Wood Packing
• Trademark: TMAX
• Origin: China

Product Description

Lab 1700C Max Controlled Atmosphere Muffle Furnace W/ PC Interface

 

1700 series controlled atmosphere furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden (Japan) 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results. All our furnaces are CE compliant.
The benefits of an controlled atmosphere furnace

An atmosphere furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment. 

Gases
One of the main components of the atmosphere furnace is the correct mixture of gases. The precise measurement of each gas is essential to the success of your project. You can use a separate chamber to mix the gases, which are then pumped into the furnace chamber where the work will be completed when they are done mixing. It is essential that the separate chamber that holds the gases does not receive any outside air because it could throw off the gas mixture and render your project useless.

Temperature

Proper temperature control is of great importance to the experimental project. Temperatures that are too high or too low can cause problems in the process and may incur additional costs.Our furnaces come with built-in 28-segment PID digital temperature controller for accurate monitoring and consistency.

 

Features
*Multiple gas inlets and outlets with stainless steel ball valves. Flow meter to control inbound and outbound gas flows. Outlets can be ignited to burn off gas.
*Furnace chamber is welded and oil leak tested to ensure air tightness. Furnace door is sealed with high temperature silicon gasket.
*Built-in stainless steel water-cooling panel protects door sealing gasket when furnace is under heavy use.*Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.
*Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)
*Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
*Built-in computer interface.
*CE compliant

Safety
*Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.
*Power failure protection resumes furnace operation right after the point of failure when power is reestablished.

 
Ultimate vacuum level for furnaces is around 100 Pa with all flange connections, and 1000 Pa with hose barb connections. Please keep in mind that our  atmosphere furnaces are NOT designed to be vacuum furnaces, the vacuuming part is mainly for users to pre-vac the chamber, before putting in inert or other protective gases.

                                                                   Specifications

Electrical requirements	208-240V, 50/60Hz, single phase
Heating element type	Molybdenum silicide (MoSi2, diameter 7mm)
Temperature control	Controller: Shimaden fp93 (Japan) with 4 programs and 40 segments (ie. 4 x 10 segments or 2 x 20 segments).  Maximum heating rate: 15°C per minute  Minimum temperature: 300°C (recommend at least 800°C for longer heating element life)  Maximum/constant temperatures: 1700°C/1600°C (Depends on gas environment)
Furnace cavity	Mitsubishi (Japan) high quality grade 1800 morgan polycrystalline alumina fiber
Thermocouple type	B
Inlet/outlet	1/4" hose barb with 1/4" BSPT (British Standard Pipe Thread)
Positive pressure	Not to exceed 0.02 MPa / 150 torr / 3 psi
Download	Product brochure
Compliance	UL/CSA (optional), CE

Maximum temperatures

Air, Nitrogen Dioxide (NO2), Carbon Dioxide (CO2)	1700°C
Helium (He), Neon (Ne), Argon (Ar)	1650°C
Sulfur Dioxide (SO2)	1600°C
Nitrogen (N2), Carbon Monoxide (CO), Hydrogen (H2) up to 5%	1500°C

Size comparison

Nominal vs usable chamber size (DxWxH)	6x6x6" / 4x5x5.5"	12x8x8" / 10x7x7.5"	16x12x12" / 14x11x11.5"
Chamber capacity (cu ft)	0.13	0.44	1.33
Installed heating element / power	4 / 3 kW	8 / 7 kW	10 / 13 kW
Unit/shipping dimensions (DxWxH)	30x24x45" / 33x30x51"	31x26x50" / 37x31x55"	34x29x60" / 40x36x70"
Unit/shipping weight (Lb)	430/510	620/720	880/1050

Standard Package

Part description	Quantity	Part image
1700 controlled atmosphere furnace	1 pc
Type B thermocouple	1 pc
Alumina cushion block	1 pc
Furnace door block	1 pc
Stainless steel tongs	1 pc
Spare heating element	2 pcs
Thermal gloves	1 pair
Spare fuse	2 pcs
USB/RS485 computer interface kit	1 set
Water pump	1 pc
Furnace operation manual	1 pc
Shimaden fp93 temperature controller manual & software	1 pc

Standard Package