| Application: | Industry, School, Hospital, Lab |
|---|---|
| Customized: | Customized |
| Certification: | CE, ISO |
| Structure: | Elevator |
| Material: | Stainless Steel |
| Type: | Crucible Melting Furnace |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| SJF1700-Mini-I SJF-Mini-II | |
| Power | 3KW 5.5KW |
| Chamber size (DXWXH) | Dia120X150mm Dia150X200mm |
| Supply voltage | 220V |
| Phase | single phase |
| Heating element | 1800 type MoSi2 heating element |
| Control mode | Using Yudian program temperature control instrument 1. 50-segment program temperature control intelligent PID adjustment. 2, with over temperature protection, broken couple protection. The electric furnace heating circuit is automatically cut off when the temperature is too high or the couple is broken. (When the temperature of the electric furnace exceeds 1720 degrees or the thermocouple is blown, the AC relay on the main circuit will automatically open. The main circuit is disconnected, the ON light on the panel goes out, the OFF light is on, and the electric furnace is limitedly protected) 3. With 485 communication interface (standard with optional software) 4, with power failure protection function. That is, when the furnace is started after the power is turned off, the program does not start from the initial temperature, but starts from the temperature when the power is turned off. 5.The meter has the function of temperature self-tuning (if you need to replace the imported instrument, you need to pay extra, optional FP93 temperature control instrument (Japan Shiden Electric) EUROTHERM Instruments Touch screen instrument |
| Heating rate | ≤30 ºC/ Min |
| Recommended heating rate | 15ºC/ Min |
| Chamber material | Model 1800 alumina polycrystalline fibre |
| Control precision | +/- 1 ºC |
| Max temp | 1700 ºC |
| Rated temp | 1600 ºC |
| Ambient surface temperature | ≤45 ºC |
| Thermocouple Type | B Type |
| Trigger | Phase-shift triggering (with soft start and current limit) Current limiting function: Regardless of how to adjust the heating time, the secondary current of our electric furnace after passing through the transformer is limited to 160A, which protects the equipment to a limited extent. No matter how you operate, the equipment will not burn out. Soft-start function: The current will gradually increase when starting up, and the impact on the heating element is small, which is conducive to the extension of the life of the heating element. |
| Electric appliance | Zhejiang chint |
| Silicon controlled | 106/16E SEMIKRON |
| Travel switch | When the lifting rod reaches the highest or lowest point, the trip switch will automatically cut off the lifting rod, so that it will not go up or down too much |
| Jacking system | Stepper motor is used to control the rise and fall of the material table |
| Lifting rate | The rate of rise and fall can be adjusted automatically |
| Materiel platform | Aluminum alloy material |
|
Certificate
|
CE |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}