Customization: | Available |
---|---|
Certification: | CE, ISO |
Warranty: | 2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Climate Chamber Temperature and Humidity Mini Test Chamber for Battery Performance Testing
Temperature humidity test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Temperature and humidity testing help to determine the behavior of the components in severe test conditions and environments that involve fluctuatingenvironment, high temperature, and different relative humidity. The tests can be done with constant temperature and humidity in a static state and can bedone in a dynamic state where the moisture is used to induce a failure of the components or materials.
Model |
TMAX-80L |
TMAX-150L |
TMAX-225L |
TMAX-408L |
TMAX-800L |
TMAX-1000L |
Internal Dimension WxHxD (mm) |
400x500x400 |
500x600x500 |
600x750x500 |
600x850x800 |
1000x1000x800 |
1000x1000x1000 |
Humidity range |
20%-98% RH |
|||||
Temperature range |
0ºC~150ºC;-20ºC~150ºC;-40ºC~150ºC;-60ºC~150ºC;-70ºC~150ºC;-70ºC~180ºC; -20ºC~150ºC;-40ºC~150ºC selectable |
|||||
The cooling rate (no-load) |
About 1ºC/min
|
|||||
The heating rate (no load) |
About 3ºC/min |
|||||
Temperature stability |
±1ºC |
|||||
Analytical accuracy of temperature |
0.01ºC |
|||||
Precision of humidity control |
±2%R.H |
|||||
Temperature uniformity |
±2.0ºC |
|||||
Humidity uniformity |
≤±3%R.H(+2,-3%RH) |
|||||
Insulation Layer |
Rigid polyurethane foam its advantages are: 1. High efficiency and energy saving, seamless after filling, strong bonding after curing. 2. Seismic and compressive resistance, no cracking, no decay, no falling off after solidification. 3. It has ultra-low temperature heat conductivity, weather resistance and heat preservation. 4. High efficiency insulation, sound insulation, waterproof and moisture-proof after curing. 5. waterproof performance is good, because the foam hole is closed, the sealing rate is 95%, and the rainwater will not permeate through the hole. |
|||||
Control System |
1. Touch control original TEMI touch screen programmable controller 2. Temperature measuring device: imported PT100 platinum resistance temperature and humidity sensor |
|||||
Refrigeration System |
1. Compressor: French "TECUMSEH" brand hermetic compressor 2. Refrigerants: DuPont of the United States adopts green environmental protection refrigerants with zero ozone coefficient 3. Condenser: air-cooled condenser (customized) 4. Evaporator: fin type automatic load capacity adjustment (automatic switching of dehumidification and cooling) |
|||||
Humidification system |
1. Water requirements RO reverse osmosis pure water or distilled water 2. Stainless steel electric steam generation humidifier 3. 1 internal water tank 4. 1 automatic feed pump (automatically supply water from lower water tank to upper water tank) 5. Water shortage alarm and water recovery device |