Customization: | Available |
---|---|
Application: | Industry, School, Hospital, Lab |
Customized: | Customized |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Furnace Construction |
1. Double shell casing with three cooling fans. 2. High purity Alumina fibrous insulation for max. energy saving. 3. Dual heating zone with 1600ºC max. continuous working temperature |
Heating Zone length & Max. Working Temperature |
1.Two zones heated separately Zone 1: working temperature 800 - 1600ºC (heated by MoSi2 ), Zone 2: working temperatur 800 - 1600 2.Cnstant temperature zone length: 10" (250mm) within +/-1 3.Max. Heating rate: 10 |
Processing tube & Sealing Flange | 1.99.8% purity Alumina Tube 2.60 mmstainless steel vacuum sealing flange with valve and meter is included 3.One ceramic block is installed on each side flange to blcok thermal radiation during rotation 4.2-3/8" (60mm) O.D. x 2-1/8" (54mm) I.D x 40" (1000 mm) Length with inside block (see picture below ) |
Gas Fittings | Inlet Fitting: Elbow Push-in connector for 6mm O.D tube; Outlet Fitting: Elbow Push-in connector for 12mm O.D tube |
Temperature Controller |
Two 30 segments programmable PID digital temperature controller |
Temperature Uniformity | +/- 1°C in heating Zone |
Tube rotating Speed | 0 - 7 RPM variable |
Furnace tilt angle | This furnace can not be tilted |
Max. Vacuum level | 4.5x10-2 torr (<0.1mtorr/s leaking rate if close all the valves to airtight the tube chamber) |
Production yield | 2 kg per batch |
Power | 8 KW Max |
Voltage | 208 - 240V single phase (50 A Breaker required) |
Warranty | One year limited warranty with lifetime support |
Compliance | CE Certified All electric components ( >24V) are UL / MET / CSA certified The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost. |
Product net weight | 100Kg |
Product dimension | 1300 x 600 x 1200mm |
Shipping dimension: | 49" x 40" x 70" |
Shipping weight | 500 lbs |
Warning |
1.The tube furnaces with alumina tube are designed for using under vacuum and low pressure < 0.02 MPa / 0.2 Bar/ 3 PSI 2.Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages. 3.The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min ) limit definition for all alumina tube furnaces: * Vacuum pressures may only be safely used up to 1500°C |
Application Notes | 1.The concept of continuous power feeding and processing can be realized by the use of Magnetic Fluid Sealed Swivel Coupling in line with Volumetric Feeder and Rotary Furnace. Please view the assembling approach diagram and video in below. 2.For CVD coating, you may choose our multi channel Gas delivery system as Pic below right. |
---