| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Battery Vacuum Sealing Machine for Pouch Cell Edge Sealing After Electrolyte Injection
This is the video link for your reference.
https://tmaxcn.en.made-in-china.com
Features
It mainly used for the first vacuum sealing of punch/polymer battery (soft-pack)lithium cell after injected and final sealing.
1)It can suitable for different specifications of battery,easily to adjust,only do the speed regulation(or change)clamp and adjust(or change)the related sealing head ok.
2)There are battery pressing platen within the upper cabinet,to press the battery tightly and make the welding effrect better.
3)The sealing-head is made of copper materials, heat transfer effect is good save power consumption,improve work efficiency.
4)The head temperature can set through the thermostat panel button control, the current value of the temperature and the set point can be through its LCD screen display, intuitive and easy operation.
Working principle
This equipment is used the tilt(flip type)to form a closed cavity,then pump the air in the cavity to form -90KP of in a negative pressure state,so that make the air within batteries core excluded.
Platen of the upper chamber use the cylinder pressing materials,and then trough sealing head using the heat conduction effect acting on a lithium battery packaging material(aluminium-laminated film),and heated close to the molten state softened and fused together.
Technical Parameter
|
Model |
Compact Vacuum Sealer TMAX-YF |
|
Source voltage |
AC 220V/110V, 50/60HZ |
|
Power |
600W |
|
Warranty |
Two years limited warranty with lifetime support |
|
Advantages |
1 Sealing Head adopts copper material, good heat transfer effect, 2 Can apply to different sizes of battery |
|
Vacuum degree |
-95Kpa - 0 |
|
Sealing head temperature |
RT-250ºC, adjustable |
|
Temperature accuracy |
±1.5ºC |
|
Sealing pressure |
0-7Kg/cm2, adjustable |
|
Sealing time |
0-99s, adjustable |
|
Sealing Blade |
Hard type (without rubber, only for Al case sealing, not suitable for sealing case with tab in between) If you need heat sealer for Top&side sealing with rubber blade,please click the pic below
|
|
Sealing width |
Customized according customer's request |
|
Sealing head length |
Standard sealing length: 200mm The sealing length can be customized according customer's request(100-500mm selectable) |
|
Air source |
0.5-0.7MPa (72.5-102psi) |
|
Dimension (L*W*H) |
Sealing Unit with Chamber Closed: 470*430*480mm Sealing Unit with Chamber opened: 470*430*559mm Control Unit: 420*320*220mm |
|
Weight |
About 50kg |
|
Note |
|
| Recommendation | |
){kind=link}