| After-sales Service: | Lifetime Support |
|---|---|
| Feature: | Automation, High Efficiency |
| Certification: | CE |
| Warranty: | 12 Months |
| Customized: | Customized |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Semi-automatic Pole Die Cutting Machine Technical Manual Cutter
I. Product model:
TMAX-HS-MQ280
II. Product introduction:
This product is suitable for die-cutting of battery positive and negative electrode sheets.
III. Main feature:
*Adopts infrared positioning device to accurately and conveniently position and die-cut the pole pieces;
*It is convenient and fast to replace the cutting die;
*The life of the knife die is long, and the normal use is ≥30,000 times;
*No quality defects such as burrs, powder loss, or indentations;
*Between manual and fully automatic, with high efficiency of 200-400 pieces/hour;
(Depending on the size of the punched pole pieces, 1 to 8 pieces can be punched each time, and the standard is 1 piece)
*Adopting four guide pillar structure, sliding up and down smoothly and with high precision;
*The feed port of the equipment has a safety protection light curtain, making the operation very safe;
*Exquisite appearance, the sheet metal adopts three-dimensional geometric design, simple and beautiful;
*Easy to operate, safe and reliable, small in size;
IV. Instructions
Put the pole piece into the die-cutting position, and then press the foot valve. The booster cylinder drives the die-cutting knife group downward to automatically cut the pole piece into shape. Take out the pole piece and it is complete.
V.Technical parameters
*Power supply: 220V/50Hz
*Power: 100W
*Compressed air: 0.5Mpa~0.8 Mpa
*Maximum punching size: 280x180mm (can be customized according to customer requirements)
*Punching accuracy: ±0.1 mm
*Supercharger cylinder: 3T
* Die-cut stroke: 150mm
*Capacity: 200~400EA/H (sheet die-cutting efficiency is slightly lower)
(Depending on the size of the punched pole pieces, 1 to 4 pieces can be punched each time, and the standard is 1 piece)
* Dimensions: L580xW455xH900mm
*Equipment weight: 120kg
VI.Equipment Composition
This machine consists of the following parts
1. Mechanical part: feeding guide part, upper mold knife mechanism, lower template mechanism, driving part, guide part, outer cover frame part, base part, discharge part, etc.
2. Electrical and standard parts
*Electrical control device: Omron/Shanghai Ergong/Chint
*Boost cylinder: Taiwan Jiuli/Kuangxin/or equivalent brand
*Pneumatic components: SMC/Taiwan Airtac
*Bearing moving parts: NSK/Taiwan Baolong/domestic high quality
*Light curtain: SUNX/or equivalent brand
VII. Maintenance methods and precautions
1. Wipe the die-cutting blade and guide components frequently to keep them clean.
2. Lubricate the linear motion parts of the ball guide post and guide sleeve to maintain smooth movement.
3. If it is not used for a long time, wipe the surface of the moving parts of the mechanism clean and spray anti-rust oil on the surface to protect it.
4. Regularly check the screws, nuts, pins and other fasteners in various parts of the machine to prevent loosening and prevent the machine from
Quality accidents and personal accidents.
VIII.Safe operating procedures
1. During operation, it is strictly prohibited to extend your hands or other parts into the punching mold, the moving parts of the ball guide post and bushing, or dangerous work areas to cause personal injury. Two or more people are not allowed to operate during operation to avoid accidental injuries.
Note: Equipped with safety light curtain, electrical protection device and safety shield, all moving parts are inside the shield to ensure personal safety.
2. Outside technical personnel and outside designated personnel cannot disassemble and debug the equipment at will.
3. Do not disassemble circuit components without permission.
Product pictures
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}