TMAXCN Brand Magnetic De-Ironing Filtration System for Battery Electrode Slurry

• Certification: CE
• Transport Package: Wood Packing
• Trademark: TMAX
• Origin: China
• Model NO.: TMAX-100L

Product Description

Magnetic De-ironing Filtration System for Battery Electrode Slurry

 


1.Introduction
This equipment is a specific feeding equipment for lithium ion battery coating machine, which is composed of two parts: turnover barrel + iron removal filter.
 
2.Standard composition and key configuration table
2.1Turnover barrel and lifting part

 

1.Feeding barrel
Design volume/use volume	150L/100L	The material of the inner tank of the mixing tank in contact with the material: 304 stainless steel.
Mixing barrel specification	About φ650*450
1) Discharge valve: G2" (DN50); 2) The barrel body has push and pull handles, and the barrel bottom has 4 casters (2 orientation + 2 universal); 3) Cooling/heat preservation: with bottom/side wall cooling jacket, cooling water inlet/outlet water distribution pipe union
2.Upper cover
Upper cover specification	Match with the corresponding mixing tank	The material of the part in contact with the material: 304 stainless steel.
1), with 2 small windows, a spotlight, feeding tube DN25 (with 304 ball valve), suction/discharge vacuum interface, vacuum pressure gauge and other spare connections; 2) The upper cover and the mixing barrel are fixed and locked with quick-locking buckles.
1. Mixing accessories and basic parameters
Mixing shaft/Mixing paddle speed	About 25rpm	Material: SUS304
Mixing motor power	1.1kw/4P	Reducer(matched with motor)	NMRV-090-60-FA-F2-Y90S-1.1KW
Mixing paddle form	Combined frame type mixing paddle.
4.Mixing principle	The combined frame-type mixing paddle performs downward pressure rotation to ensure that the material does not deposit.
5.Vacuum guarantee system: 5 skeleton oil seals are installed in parallel, and the vacuum source is provided by the user
1), the vacuum degree is ≤-0.098Mpa, keep for 24 hours not less than -0.08Mpa.
2) Sealing method: A, static seal uses "O"-shaped sealing ring; B, skeleton oil seal.
6. Power distribution box: the stirring switch, spotlight switch, emergency stop and other functional operations during equipment operation are all carried out on the power distribution cabinet.
7. Lifting device: 1 φ125x800 lifting cylinder, equipped with 1 safety pin

 

2.2Iron removal filter part

 

No.	Name	Material	Note
1	Shaft seal	Viton	Wear-resistant and corrosion-resistant
2	Blade	Polyester plastic	(imported from UK)Wear-resistant and corrosion-resistant
3	Blade spring	SUS304
4	Sealing ring	Silica gel
5	Shaft assembly	EPDM+SUS304
6	Filter element	SUS316	Accuracy deviation value: ±0.03mm (maximum ±0.05mm), diameter deviation value: ±0.3mm 80 mesh to 200 mesh optional (standard 120 mesh)
7	Shell/Upper and Lower Plate Cover/Blade Holder	SUS304
8	DC motor		24V/60W
9	Separator pump	Aluminum alloyQBY-25

 

3.Liquid level sensing system
Working principle: The liquid level sensor transmits the signal to the solenoid valve according to the change of the material liquid level, and the solenoid valve controls the feeding amount of the pneumatic diaphragm pump, thereby realizing the function of automatic feeding.

No.	Name	Model	Quantity	Note
1	liquid level sensor	Domestic brand	1
2	The electromagnetic valve	Taiwan	1
3	Intermediate relay	Domestic brand	1
4	Intermediate relay holder	Domestic brand	1
5	Rotary Switches	Domestic brand	1

 

4.Principle
This equipment is filled with dry compressed air into a sealed pressure barrel, and pressurizes the inner cavity of the pressure barrel to press the slurry into the upper trough of the coating machine.