| Customization: | Available |
|---|---|
| Condition: | New |
| Certification: | ISO9001 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Temperature range | + 20 ºC - 300 ºC |
| Temperature rise speed | Rise from room temperature to 300 ºC for about 35 minutes |
| Insulation performance | The outer wall temperature shall not exceed 45 ºC (when the furnace temperature reaches 200 ºC) |
| Temperature control accuracy | ± 1 ºC |
| Temperature uniformity | ± 3 ºC |
| Power supply | 380V / 50Hz |
| Equipment construction: | |
| Color | Overall spraying of Matt amino paint, silver grey |
| Equipment positioning | Iron foot support at the bottom, and the height from the lower plane of the liner to the ground is 380mm |
| Inner chamber size | 1300mm * 1520mm * 710mm |
| Material placement | Equipped with two movable drying racks, each with 8 trays |
| Heat source configuration | 3 W-type heat pipes with metal sheath, in the top air duct |
| Circulation mode | Horizontal air supply, 1 set of 370W motor |
| Air intake and exhaust | Air intake from fan shaft hole. Top vent, manual vent |
| Sheet metal structure | 1mm stainless steel plate for inner tank, 1mm cold-rolled plate for outer shell, bending, splicing and welding |
| Framework structure | The whole 4-angle steel frame, the bottom 5-angle steel frame, the door frame 5mm thick sheet metal reinforcement |
| Insulation layer | 90mm aluminum silicate fiber |
| Structure | single door, silicone strip seal, alloy hinge, rocker lock |
| Electrical control: | |
| Dual digital PID intelligent temperature controller main control | |
| Independent temperature measurement by the monitor, over temperature protection circuit to monitor the overall operation of the equipment to ensure the safety of the equipment and drying materials | |
| Adopt SSR solid-state relay to turn on and off to control the temperature rise of electric heater | |
| Equipped with 0-99.99 hour timer, which can be used for direct timing or temperature timing, and automatically cut off heating and alarm when the time is up | |
| Air blast heating interlock protection circuit, that is, air blast before heating to prevent heater from dry burning | |
| The phase sequence protector shall prevent the reverse operation of the fan caused by the reverse connection or lack of phase sequence | |
| Heating circuit breaker to prevent accidents caused by overload and short circuit of heating circuit | |
| Fan and control circuit breaker shall prevent overload and short circuit of fan and control circuit from causing accidents | |
| The temperature recorder records the temperature curve of the working area in real time, which is used to analyze the material baking process (optional) | |
){kind=link}