| Customization: | Available |
|---|---|
| Production Scope: | Product Line |
| Production continuity: | Continuous |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Battery High Altitude Low Pressure Test Chamber for Environmental Simulation
I. Product Overview:
This test chamber is designed according to UL, EN, IEC, and other standard testing requirements. It can rapidly achieve the low-pressure storage state of the sample and automatically control the test cycle. The pressure changes within the chamber are monitored throughout the test, and the test is automatically terminated once the set parameters are met. The chamber simulates the storage conditions for batteries and battery packs at a pressure of 11.6 kPa or lower and an ambient temperature of (20±5)ºC for 6 hours. A battery is considered qualified if there is no leakage, no gas emission, no disintegration, no rupture, and no fire, and the open-circuit voltage of each tested battery or battery pack after the test is not less than 90% of its voltage before the simulation test.
II. Compliance Standards:
GB/T 18287, UL 2054, UN 38.3, UL 1642, IEC 61960, IEC 62133, and other relevant testing standards.
III. Product Parameters
|
Pressure Range |
0.5 ~ 100 kPa, commonly used 11.6 kPa |
|
Pressure Fluctuation |
≤ 5% |
|
Timer |
LED display, adjustable 0-99 hours (H/M/S seconds switchable) |
|
Vacuum Display |
Pointer type or digital display |
|
Safety Device |
Over-pressure protection, automatic alarm in case of operational error or end of test time |
|
Inner Chamber Material |
Stainless steel |
|
Outer Chamber Material |
A3 cold-rolled steel plate with baked paint |
|
Shelving Material |
Stainless steel |
|
Inner Chamber Dimensions |
400x400x450mm (LxWxH) |
|
Outer Chamber Dimensions |
550x550x1200mm (LxWxH) |
|
Weight |
Approx. 120kg |
|
Power Supply |
AC 380V, 50Hz |
){kind=link}