| Customization: | Available |
|---|---|
| Type: | Coating Production Line |
| Coating: | Vacuum Coating |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Lab Intermittent Film Coating Machine for Lithium Battery Electrode Coating
| Working Voltage | 380V AC |
| Max. Power Consumption | 10 KW ( 30A Air breaker required ) |
| Max. Coating Width | 300mm |
| Thickness adjustable range | 0-5mm |
| Coating thickness (after drying) | 20 - 200um (for most kinds of battery electrode coating material) Note: The dried coating thickness results vary depending on the physical property of the coating material. |
| Thickness Precision | ± 3µm (± 5µm at edges) |
| Coating Speed | 0-300 mm / minute |
| Max. Drying Temperature | 150°C |
| Temperature Accuracy | ±2.5°C |
| Heating Zone Length | 710mm (28") |
| Reeling/Unreeling Shaft |
75mm (ID) |
| Max. Reeling/Unreeling Diameter | 300mm (OD) |
| Max. Coating Length |
· Depending on the coating and substrate thickness. · Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run |
| Coating Modes | · Using transfer coating technique ( Reverse comma ) for better uniformity · Two available coating modes selectable on the control panel. o Continuous mode o Intermittent coating ( system performs coating, stops, coats again and so on. The length of the coating and break segments can be specified by the user ). |
| Slurry Stirring | SS316 Moving Rod |
| Exhaust Port Size | 127mm O.D |
| Compressed Air | 0.5-0.8 MPa (Air compressor not included. Please click here to order) |
| Product Dimensions | 1650mm ( L) x 1250mm (W) x 1200mm (H) |
| Warranty | · Two Years limited warranty with lifetime support · Rusting and damage due to improper storage condition or maintenance are not covered by warranty |
| Net Weight | 1000 kg |
| Shipping Dimension | 70" x 50" x 60" |
){kind=link}