| Customization: | Available |
|---|---|
| After-sales Service: | 1 year |
| Warranty: | 1 year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Working Voltage | 208 - 240 V AC, 50/60Hz, Single Phase |
| Max. Power Consumption | Max15KW |
| Max. Coating Width | 280mm |
| Coating Speed | 0-1000 mm / minute |
| Thickness Precision | ± 3µm (± 5µm at edges) |
| Max. Drying Temperature | 150°C max |
| Temperature Accuracy | ±1°C |
| Heating Zone Length | 1600mm |
| Reeling/Unreeling Shaft | 75mm (ID) |
| Max. Reeling/UnreelingDiameter | 250mm (OD) |
| Max. Coating Length | 1. Depending on the coating and substrate thickness. 2. Typically, 10um thick foil with 100um coating can get 600 meters of electrodelength coated per run |
| Coating Modes | 3. Using transfer coating technique (Doctor Blade Coating) for better uniformity 4. Two available coating modes selectable on the control panel. 1. Continuous mode 2. Intermittent coating ( system performs coating, stops, coats again and so on.The length of the coating and break segments can be specified by the user ). |
| Slurry Stirring | SS316 Moving Rod |
| Exhaust Port Size | 100mm O.D |
| Compressed Air | 0.5-0.8 MPa |
| Product Dimensions | 2500*1060*1200mm |
| Net Weight | 1300kg |
| Compliance | CE Certificate |
| Warranty | One Year limited warranty with lifetime support |
| Application Notes | Please use Acetone to clean and dry the doctor blade, slurry feeder, and roller toavoid rusting |
){kind=link}